Ive been working with a client on designs for a bar cabinet for The Walnut Paneled Room for a couple of months now. Nothing serious, no great urgency, typical back and forth ... sketch here, cad drawing there ... arm waving here and there, but now we think were homing in on it. So, knowing the client was going to be here this weekend and having just had a really good experience with a full size mockup with another client I decided to make a cardboard model of the bar. I had to deliver some other stuff to the house last week anyway. It turned out ot be very helpful for all of us. I think it took about an hour and a half total effort, and, in the end, you could probably mix drink on it to try it out. Drawings are great, but the real thing, real size, is usually better ... Click the pictures to enlarge them.
The cardboard model in the shop. If you double cardboard up with glue between the layers it gets pretty stiff when the glue dries ... I also glued and stapled thin strips of wood the the corners in the front to strengthen the legs ...
Most recent CAD drawing .. Im still working on the riser backboard stepping design
The table leg and paint/wood combination were considering. Were thinking about maybe a red for the carved legs and a lighter, more natural color chestnut or recycled oak for the top.
Side view of the model in place
Head on
The last on site sketch
Previous CAD drawing
0 comments:
Post a Comment